A nail not straight or curved, if appear this situation, if not loose screw mold base is scissor parts do not meet the requirements, structural imbalance or scissors. We just check whether the trapezoidal screw head is accord with the requirement of our nail making machine clamping nut loose, tighten the nut; The second nail making machine tool when the shear stiffness of different material, the blade wire nail making machine is also different; At the time of check the nail making machine cutting parts, if necessary, we can change the parts to solve this problem. No head of nail: this is a common fault, a large part is the cause of the wire clamp fixture not peg, you just need to change the fixture is ok; There is another set aside may be blunt head of nail wire nail is too short, adjust the nail wire length can be reserved.
Head of nail thickness: also need to look at the fixtures, see two pairs of the fixture height are the same, it remains to be seen whether fixture clamping screw wire, then there is observing the sink hole of the fixture for the single side wear nail manufacturing machine serious condition, after to be seen whether nail wire is too hard to rush out the head of nail is unqualified. These are in the process of nail installation, the nail in some of the adverse conditions, only according to the above slightly revised, you can find problems and correct them.
Head of nail out of round: the failure problem is also on the fixture, usually first observe whether the countersunk hole on the fixture is round, if you are not round need to drill; Also need to observe whether die fixture is rugged, adjust the level. Another possibility is the issue of nail wire, set aside or head of nail wire nail is too short, adjust the length of the nail wire reserved; Or is too hard to rush out of the head of nail nail silk or head of nail is unqualified, need to nail wire annealing.
Nail wire drawing equipment used for not only in the process of the nail, nail wire drawing equipment at the same time can also be used to other more fields. Nail wire drawing equipment is drawing wire rod steel wire, nail, many different kinds of wire drawing equipment, has a cascade tank, water tank wire drawing machine wire drawing machine, etc, cascade tank wire drawing machine in accordance with Iron Nail Making Machine the pulley drawing is given priority to, even after drawing the steel can be used in the production such as: car bike basket. Article. Umbrella stand. Cage. Refrigerator shelf. Fan cover. Building silk. Silk screen mesh, etc. Cascade of tank and water tank wire drawing machine wire drawing machine wire drawing machine equipment, wire drawing can be more thin, can be widely used in production of metal products, handicrafts, daily necessities of the fields. Wiredrawing equipment operation is simple, can be customized according to demand cascade tank and independent type wire drawing machine wire drawing machine.