A nail not straight or curved, if appear this situation, if not loose screw mold base is scissor parts do not meet the requirements, structural imbalance or scissors. We just check whether the trapezoidal screw head is accord with the requirement of our nail making machine clamping nut loose, tighten the nut; The second nail making machine tool when the shear stiffness of different material,...

Nail making machine is mainly divided into four, the most important thing is drawing. To determine when buying nail after after nailing with what kind of steel, such as like new steel, scrap steel, and so on. Scrap steel wire drawing more troublesome, not as good as new reinforced so fast, but the cost of the scrap steel it profits is very objective. The finished wire drawing, speed is faster,...

"Holding" nail "clamping" part of the machine is mainly used for the nail fixed, in the process of nail, regardless of the size of the nails, use nail making machine, nails clamping device used for embedded buckles each other clamping structure inside is hollow, and at one end of the device is equipped with embedded slots. And a clamping device, embedded in the caulking groove and on its...

Made a complete nail, will need to begin from wire drawing process, the entire process in addition to the nail making machine, also need equipped with all kinds of auxiliary equipment, and their functions are different. It's not easy to complete the equipment, including wire drawing machine, grinding machine, polishing machine, butt welding machine, pointing machine, etc., have to master all...

The first is the circular arc of the nail making machine equipment is half, manipulation in 1/20 ~ 1/5 of its diameter, but also to the whole forging process of nail. Nail making machine also includes the upsetting on and flange component, its specifications and appearance to grasp well, thus to prevent the occurrence of the vertical bending nail safe hidden trouble. And nail is according to...

Material quality, there are defects such as clip sew ash, defended cause tool wear fast; Some of the cutting tool edge is not in conformity with the requirements, applicable to different hardness and strength of the parts are also different. Into the line, a knife or into line roller into the line clamping force is insufficient or too tight. At this time, we should adjust the wire feeding...