"Holding" nail "clamping" part of the machine is mainly used for the nail fixed, in the process of nail, regardless of the size of the nails, use nail making machine, nails clamping device used for embedded buckles each other clamping structure inside is hollow, and at one end of the device is equipped with embedded slots. And a clamping device, embedded in the caulking groove and on its side Automatic nail machine with one extends to the connection outside the ontology, but on the other side is equipped with clamp arm. Because of the clamp arm is convex Lou at outside, so just to nail, with this device, the operator don't need directly by hand on a nail, at the same time also can have the effect of fixed nail, ensure the safety of nail making machine operation.
In the process of nail, the nail into the line on one end of the tie rod and crankshaft eccentric disc is linked together, and the other end is connected to a transmission arm. When the machine into line eccentric disc will follow Automatic Nail Making Machine synchronous rotation, and affects the pull rod movement back and forth, prompting the transmission arm swinging back and forth around pin, eventually achieve the goal of into line.
How to control in on-line? Before not boot, can be manually pull (into line control handle can control into line, stop line at any time, and appropriate adjustments in line on the eccentric disc is rod, also can realize the into line length adjustment. If want to make the time changes into a line, just need to rotate the Angle of the eccentric disc into the line, to ensure that everything can satisfy the requirement of nail.
Nail making machine running routine after there is Nail Making Machine manufacturers no problem, nail product if unsuitable, because most nail making machine calibration method and nail making machine fittings and wire rod, such as nail tip is not straight or cut constantly, is related to nail cutter and wire. Should keep screw blade, apply appropriate wire nail making machine 195 wire and so on. For nail making machine equipment operation, nail opportunities are workers install the door installation guide and the nail making machine maintenance considerations for the church to understand. Nail polishing machine is the nail polishing processing, after making nail polishing machine structure is simple. Meantime just add wire drawing powder or lubrication stuff can be done.