Vessel packaging hot rolled or cold drawn seamless stitching precision steel tube, the outward appearance fine polishing of hot rolled stainless steel precision tube, can choose vessels (such as plastic box and wooden case packing). After packing vessel net weight should meet the requirements of table 1. Through consultation between both parties, big net weight of each container can be aluminium coated steel tube increased. Precision steel tube into vessels, containers of cardboard, plastic film, or other inner chamber should be fitted waterproof sheet. Vessels should be sealed is not suitable for leakage. For vessel packaging precision steel tube, should be within the vessel with a sign. In the vessels to the outer surface, should also be a sign.
Can improve customer permission bundle of heavy, but not more than 80 kg. Precision steel tube baling machine for flat end, end solve qi, full-justified side hydraulic steel pipes are separated by less than 20 mm, the length of each bundle of precision steel tube difference less than 10 mm, but according to the order of precision steel tube length usually the length of each bundle of precision steel tube difference less than 5 mm, a bundle of precision steel tube length in long of not more than 10 mm.
Prevent precision steel pipe damage in the binder and transport links, baling machine sign to unify. The same bundle of precision steel tube which is of the same furnace number, production batch number), and steel grade, the same side impact beams types of precision steel tube, not mixed furnace (production batch number) baling machine, not a bundle should get into some bundles. Precision steel tube bundles of not higher than 50 kg net each.
Way of baling machine precision steel tube length is higher than or equal to 6 m, each bundle of at least eight tie belt, divided into 3 groups, get into the 3-2-3; Precision steel tube length less than 6 m, each bundle of at least five side impact door beams tie belt, divided into 3 groups, get into the 2-1-2; (FIG. 1 for precision steel tube length is higher than or equal to 5 meters away from tube precision steel tube bundling machine strip parts plan) precision steel tube length is higher than or equal to 3 m, tie belt type at least 3 per bundle, divided into 3 groups, get into the 1-1-1. Figure 1 is higher than or equal to the length of 6 meters away from the tube precision strip steel banding machine parts plan have special requirements, can add four on single precision steel pipe, plastic spring or plastic ring spring or circle line should be strong, can't happen in transport link loose, fall off.